Looking for Microchip ICD breakout board? This board breakout MPLAB ICD3 or MPLAB REAL ICE PIC programmer for ease of use.
This RJ11 breakout board bring all 6 pins of a 6P6C modular jack out to screw terminal blocks for easy connection and prototyping work. The connections are also available via 0.1" header pins. We've included a male header strip (see picture#3 below). You can solder it on the top and use with these
female to male jumper wires for breadboard connections (see picture#5 below). Or solder it on the bottom and use it directly on the breadboad (see picture#6&7 below).
This break out board is perfect for experimentation and prototype work, as well as for use in the educational laboratory. It is well-suited for work with the telephone ports, data acquisition equipment, and any other device that uses an RJ11/6P6C connector (i.e. ICD connector from MPLAB ICD3 or REAL ICE PIC programmer). A breakout board is sometimes referred to as a "transition module", "terminal board", or "interface module".
Features:
• All 6pins of a RJ11onnector brought out to screw terminal blocks
• Additional male header pins breakout
• High quality PCB with blue soldermask
• Four mounting holes
• Breadboard friendly
• Board dimensions is 0.84" x 1.00"
NOTE: The 0.1" male header is not solder on the board. You get exactly like picture#3 below.
Documents:
Mechanical Dimensions:
RJ11-TERM.PDF
Mechanical 3D eDrawing:
RJ11-TERM.EASM
Mechanical 3D eDrawing:
RJ11-TERM.EDRW
